350-801 clcor exam

350-801 clcor exam

C 192.168.1.0 is directly connected, Serial0/1/0 RouterA# gbic-invalid Disabled Fa0/2 2 Learn how to configure voice VLANs on a Cisco switch. interface GigabitEthernet0/2 switchport L1 - IS-IS level-1, L2 - IS-IS level-2, You actually wanted the packet to be permitted by the router, but instead it denies it. The reason is the implicit “deny all,” which is a security measure. Take today’s challenges 3.4.d Single vs dual-homed [ICND2] Over the years, additional DHCP options have been added, especially for VoIP use,350-801 clcor exam, such as the following: Configuring a switchport to support IP phones is not as complex as you may think once you understand the full capabilities of what an access port can do. For example, even though a port connected to a phone acts like an access port, the voice frames are tagged with an 802.1Q header so that the switch and the phone will understand what is voice traffic versus data traffic. Access Mode VLAN: 1 (default) Trunking Native Mode VLAN: 1 (default) [Truncated Output] Port Security Actions Securing the Switch Prevent Telnet Access Switch port security ACL rules Wildcard masks ACL configuration Show the ACLs. Copy and paste into Notepad and make the changes: Bandwidth Switch-1(config-if-range)#switchport access vlan 20 Switch-1(config-if-range)#switchport mode access Switch-1(config-if-range)#exit Re-read notes from days 5-7 and redo the labs Complete today’s challenge labs You will only encounter networks using one switch in the smallest of offices. You will usually find multiple switches forming part of the network infrastructure. This brings its own set of configuration challenges, which will require a good understanding of trunking and associated issues. Cisco consider the ability to install, configure and troubleshoot multiple switch connections a fundamental CCNA-level topic.