Conclusion of CISCO ASA configuration SSL VPN steps

CISCO ASA is the most mainstream firewall in the world currently. So how should we configure this kind of firewall? This problem has stumped many people. Today I will teach you how to configure CISCO ASA's SSL VPN.

CISCO ASA Configure SSL VPN Steps:

ip local pool vpnpool 192.168.100.200-192.168.100.254 mask 255.255.255.0 webvpn

 enable outside

svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1

 tunnel-group-list enable

 svc enable

access-list split-tunnel remark Internet

access-list split-tunnel standard permit host x.x.x.x (Public network IP )

group-policy clientgroup internal

 group-policy clientgroup attributes

 vpn-tunnel-protocol webvpn

 split-tunnel-policy tunnelspecified

 split-tunnel-network-list value split-tunnel

 webvpn

svc keep-installer installed

 svc re key time 30

 svc re key method ssl

username ssluser1 password ssluser1

aaa local authentication attempts max-fail 16

tunnel-group sslgroup type remote-access

 tunnel-group sslgroup general-attributes

 address-pool vpnpool

 default-group-policy clientgroup

tunnel-group sslgroup webvpn-attributes

 group-alias sslgroup_users enable

global ( outside) 101 interface

 nat (inside) 101 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 Public network gateway

More Cisco technical articles are available at PASSHOT, which not only allows you to learn Cisco work skills but also helps you pass various CISCO exams, such as CCIE WRITTEN EXAM and CCIE LAB EXAM!